How to Use Citristrip Stripping Paste

Citristrip stripping paste is a non-toxic, citrus-based paint and varnish stripper that can be used to remove multiple layers of dried paint, varnish, lacquer, polyurethane, and shellac from wood, metal, and masonry surfaces. It is a safe and effective option for stripping paint from furniture, cabinets, doors, and other wood projects.

In this article, we will walk you through the steps on how to use Citristrip stripping paste. We will also provide some tips and tricks to help you get the best results. This content is presented by Thinkhousecreative.com.

What You Will Need

• Citristrip stripping paste
• A paintbrush or roller
• A plastic scraper
• Safety glasses
• Gloves
• Old rags
• A bucket of water
• A hose

Instructions

1. Protect yourself. Before you start stripping paint, it is important to protect yourself from the chemicals in Citristrip stripping paste. Wear safety glasses and gloves to protect your eyes and skin.
2. Test the stripper in an inconspicuous area. Before you apply Citristrip stripping paste to the entire surface, test it in an inconspicuous area to make sure it does not damage the wood.
3. Apply the stripper. Apply Citristrip stripping paste to the surface you want to strip with a paintbrush or roller. Apply a thick, even coat.
4. Let the stripper sit. The amount of time you need to let the stripper sit depends on the number of layers of paint you are trying to remove. For most projects, you will need to let the stripper sit for 30 minutes to 2 hours.
5. Scrape the paint. Once the stripper has had time to work, use a plastic scraper to remove the paint. Scrape in the direction of the grain of the wood.
6. Wipe away the stripper. Use a damp rag to wipe away any remaining stripper.
7. Repeat steps 3-6 as needed. If you still have paint left after the first round of scraping, you can repeat steps 3-6.
8. Clean up. Once you are finished stripping the paint, hose down the surface with water to remove any remaining stripper. Then, dispose of the stripper according to the manufacturer’s instructions. Explore citristrip paste vs gel.

Tips and Tricks

• For best results, work in a well-ventilated area.
• If you are stripping a large surface, you may want to use a heat gun to help the stripper work faster.
• Be careful not to scrape too hard, as you can damage the wood.
• If you get Citristrip stripping paste on your skin, wash it off immediately with soap and water.
• If you get Citristrip stripping paste in your eyes, flush them with water for 15 minutes and seek medical attention immediately.

FAQs

1. How long does Citristrip stripping paste take to work?

The amount of time it takes Citristrip stripping paste to work depends on the number of layers of paint you are trying to remove. For most projects, you will need to let the stripper sit for 30 minutes to 2 hours.

1. How do I know if the stripper is working?

You will know the stripper is working if the paint starts to bubble and peel away from the surface.

1. Can I use Citristrip stripping paste on metal?

Yes, you can use Citristrip stripping paste on metal. However, it is important to test the stripper in an inconspicuous area first to make sure it does not damage the metal.

1. Can I use Citristrip stripping paste on masonry?

Yes, you can use Citristrip stripping paste on masonry. However, it is important to test the stripper in an inconspicuous area first to make sure it does not damage the masonry.

1. Is Citristrip stripping paste safe to use indoors?

Yes, Citristrip stripping paste is safe to use indoors. However, it is important to work in a well-ventilated area to avoid breathing in the fumes.

Conclusion

Citristrip stripping paste is a safe and effective way to remove multiple layers of dried paint, varnish, lacquer, polyurethane, and shellac from wood, metal, and masonry surfaces. It is a relatively easy product to use, but it is important to follow the instructions carefully and take the necessary safety precautions. For example, you should wear gloves, goggles, and a dust mask when using citristrip. You should also avoid getting the product on your skin or eyes.

One of the safety precautions that is important to follow when using citristrip is to avoid using water on the wood furniture that you are stripping. Is it ok to clean wood furniture with water? No, it is not recommended to clean wood furniture with water before stripping it. Water can reactivate the stripper and make it more difficult to remove the old finish. If you need to clean the wood furniture before stripping it, you should use a damp cloth or a mild soap and water solution.